Buy the official Creality3D CR-10S 3D Printer New Version for a discounted price of $410 and enjoy a 1-year warranty and 14-day return. The results speak to this with superb quality prints for the price. As an FDM printer using standard 1.75 mm filament, the Creality Ender 3 Pro is ideal for those that want to keep costs down moving forward. The Creality Ender 3 Pro does ship as an assembly kit, and while the build may take a few hours, it’s relatively straightforward. The largest dictionary of idioms and phrases currently in use in British, American and Australian English. Over 12,000 phrases and expressions. Now, to understand why prints are angled, let’s go back to the curing stage during the print. When the light shines through the FEP and cures the resin, the cured resin sticks to the FEP sheet. The build plate must move up and exert a “Peel force” on the model to separate it from the build plate. The loudest noises probably come from the suction force of the FEP and the moving of the build plate in the upward and downward direction with the motors. High Level Anti-Aliasing (16x) Having a high level of anti-aliasing can be very beneficial to getting some nice details in your 3D prints.
2022.01.27 00:19 ProtocolThree FEP tearing after only a few prints.
Hi everyone. TL;DR at the end.
Lately, I've been having some problems with my Mono X, particularly with my FEP. I've been trying to tune my settings one at a time. I've gone through about 10 prints and tuning the settings as I go.
The first variable was FEP. Just so yall can critique my process if I'm doing anything wrong, I set the vat on its side, and tap on it lightly using an app on my phone to get the frequency.
Anywho, I started pretty low, 160 hz. Did several prints, nothing would print. Worked my way up to about 280hz, ran some prints, and had moderate success. I ran about 3 (mostly successful, one came out perfect, the other two I lowered the cure time and it began to fail) test prints before the FEP started to get a stretch mark along the middle where one of the beams of the test cube frequently cured.
To me, this seems like that stretch mark is because the FEP is too tight. I've tried lowering the lift speed with marginal improvement but still failed results. Furthermore, prints begin to fail in areas that overlap the stretch mark, and only in that area.
I've done some research about this issue and I get a lot of comments like "FEP is a consumable, it happens, you gotta replace your FEP." Thing is, this FEP was replaced about 5 prints ago and it's getting stretch marks so early in its lifespan.
Why am I getting these stretch marks so early on? Should I be increasing or decreasing the tension on my FEP? I'm thinking I'll replace my FEP since I still have more tests to run to get my settings down, and the mark on this FEP is causing current tests to fail.
Thanks in advance, any help is greatly appreciated.
More info: Using anycubic standard grey, 2s cure time, 1.5 sec lift, 2.5 sec retract, rest of settings are same as the preinstalled test cube. FEP is the mono x FEP sheet straight from anycubic.
TL;DR, My nearly brand new FEP is getting stretch marks at roughly 260hz tension. What causes this, and why is this happening?
submitted by ProtocolThree to AnyCubicPhotonMonoX [link] [comments]
2022.01.27 00:19 throwaway19897500 Trying to import a UK spec 1999 mr2 into the US, possible? Different brokers giving me different answers.
As the title says. I have a friend in the UK selling a 1999 uk spec mr2 with a modified engine.
Im being told different things by different brokers. Some say they can while others say dont do it. You cant because it’s modified and not 25 years old.
However, the mr2 sw20 was manufactured here until 1995. Does that make any difference?
Let me know your thoughts.
submitted by throwaway19897500 to Autos [link] [comments]
2022.01.27 00:19 HeinousDebacle Hot Pursuit?
2022.01.27 00:19 SubSonicRocket This Lint Baguette from my work dryer
|submitted by SubSonicRocket to mildlyinteresting [link] [comments]|
2022.01.27 00:19 dandydiehl My girlfriend's husband already has 4 yellow Femders. What guitar should I buy for his 2nd anniversary?
2022.01.27 00:19 dafunkyman Earsknott - Nonchalant [Chill Hip Hop/Instrumental]
|submitted by dafunkyman to treemusic [link] [comments]|
2022.01.27 00:19 lazyassredditor At&t numbersync
So, I just got a fold 3 and while I picked that up, I figured I'd get my first smart watch.
Decided to get a galaxy watch 4 classic, added the watch line, and took my watch home and started playing with it.
I use android phones because i fell in love with the fantasy of having a do anything device in my pocket, and so I bought into a smart watch because I Thought it would be great to be able to leave my phone at home or in the car when I go lift. And be able to recieve all the same notifications and texts/calls...etc if it was important, while losing the distraction of browsing.
I've been messing with numbersync on this for 3 or 4 days on and off trying to get it to work and I'm at a loss, does anyone have a solution? I can't be the only one hitting this wall.
Any help is appreciated,
submitted by lazyassredditor to GalaxyWatch [link] [comments]
2022.01.27 00:19 Independent-Peanut24 [16M] bored af
I’m bored af anyone wanna chat for a bit? I like cars and racing games (the f1 games, assetto corsa, beamNG and ATS even tho it’s more a driving then a racing game) I also like gta, minecraft and osu! (I’m shit)
Anyway be 15-17, comment or dm, hope to talk to some of you soon :)
submitted by Independent-Peanut24 to TeensMeetTeens [link] [comments]
2022.01.27 00:19 cryptocalbot First CEX Listing - Inu Wars (IWR): March 30, 2022
2022.01.27 00:19 HJenkinsRSN Huge Matches Booked For AEW Dynamite Next Week
|submitted by HJenkinsRSN to ringsidenewscom [link] [comments]|
2022.01.27 00:19 TheRealLardin The Cure - "Disintegration" Bass Cover With TABS [1080p] 1:43
|submitted by TheRealLardin to bassplaying [link] [comments]|
2022.01.27 00:19 Trichoceratops I’m only 13min into the members early release of the Oliver Tree episode and it’s the best episode in H3 history. That is all.
2022.01.27 00:19 El_chaftt Cuidado
|submitted by El_chaftt to DylanteroYT [link] [comments]|
2022.01.27 00:19 HairsprayQueens [Spittin' Chiclets on Twitter]. Biz: What do you do in order to decompress when you get away from the rink and enjoy yourself? Yzerman: I can’t be honest with that one. Not on national TV. Biz had Stevey against the ropes
2022.01.27 00:19 StopTransface Another low effort meme.
|submitted by StopTransface to xenogendercringe [link] [comments]|
2022.01.27 00:19 Dramatic_Buddy996 Fuck your calls
2022.01.27 00:19 reddituserhere6 Fibonacci Pivot Support & Resistance Levels
Nifty - Fibonacci Pivot Support & Resistance Levels for January 27, 2022
R3 : 17613.65
R2 : 17433.21
R1 : 17321.74
Pivot Point : 17141.3
S1 : 16960.86
S2 : 16849.39
S3 : 16668.95
BankNifty - Fibonacci Pivot Support & Resistance Levels for January 27, 2022
R3 : 38676.92
R2 : 38152.36
R1 : 37828.28
Pivot Point : 37303.72
S1 : 36779.16
S2 : 36455.08
S3 : 35930.52
Please Trade carefully near these areas of Support & Resistance
submitted by reddituserhere6 to TAIndia [link] [comments]
2022.01.27 00:19 NateAtttack I was getting over her but what I just saw didn't help
For those of y'all that remember me, do u remember my friend and crush that I fucked up the first date with because I overslept and she forgave me and calmed me down? The girl that just met a new best friend in college and she's dating him now? The one that I never told I liked her?
Yeah she's posting more about her and this guy, on Instagram.. and she rarely posts..
It obviously stung like a bitch, so..
Y'know what? I'm tired. I think I need a nap. Like a few days long type of nap.
submitted by NateAtttack to Crushes [link] [comments]
2022.01.27 00:19 heyyyaaaa The protagonist is Neil's dad
Adoptive father that is
Neil is max, once the event of the movie has finished its clear TP has a thing for Max's mom. He gets with her and raises Max as is own
He sent his adoptive child to die to save the world
The last scene with them was not emotional due to a pair of good friends saying goodbye, but moreso a farewell between father and son.
submitted by heyyyaaaa to tenet [link] [comments]
2022.01.27 00:19 cryptocalbot First CEX Listing - Inu Wars (IWR): March 30, 2022
2022.01.27 00:19 TallWithSmallPackage Behold, the Queen of Scotland
|submitted by TallWithSmallPackage to HolUp [link] [comments]|
2022.01.27 00:19 russlar "Bring Me The Horizon" [1920x1080]
|submitted by russlar to StarshipPorn [link] [comments]|
2022.01.27 00:19 BeanoBrew Found keycard holder and Dogtag case but can't sell?
2022.01.27 00:19 AFernHandshake From a beach in SoCal, under a pier. Wharf? Pier?
|submitted by AFernHandshake to FoundPaper [link] [comments]|
2022.01.27 00:19 minim69 aeise mere frand ne bola, turu hai kya?
|submitted by minim69 to FingMemes [link] [comments]|